Sheet Roll Forming Line SUNDWIG
1. Weight of about 180 tons
2. Input sheet width 70 mm ….. 615 mm
3. The strip thickness 2.5 mm …… 6 mm
4. The speed profiling 7 … 67 m/min.
- Request a Quote
Request a quote
Related Products
-
Clamping plates 4000(5000)x2500x310mm
For sale:
– any number of unused clamping plates.
– any number of clamping plates used.
Very reasonable prices compared to the brand new manufactured today. -
Bar Peeling Machine KZTS 9340
Manufacturer: KRAMATORSK, Ukraine
Model: KZTS 9340
Year: 1974
Technical Details:
Bar diameter to be machined 70-210 m
Bar length 3000- 12000 mm
Spindle speed 30-510 rpm
Bar feed 140-4000 mm.min
Main drive motor 200 Kw
Machine dimensions 42000 x 7500 x 2400 mm
Machine weight 90.000 kg
Finish surface roughness Ra 6,3 Micron
Voltage 380/220 V
Frequency 50 Hz
Description: complete on the original installation -
Broaching Machine Stanko 7B57
Year: 1983
Power: 40 tons
Maximum length: 2000 mm
Machine weight: 15800 kg -
Edge planning machine Stanko 7814
year 1984,
max. working length 14000mm,
max. working width 2000mm,
max. working height 200mm,
dimensions 20140 x 4500 x 3250mm,
weight ca 50 ton
-
Molding line
Carasteristic of molding line: producer: Found Equip,(I), manufactered year: 2010, running only in trial, 5 month, excelent condition, – capacity: 18 moulds /h, – Frame dimensions: 1400 * 900 * 300 + 350mm, – Clamping system: Multi-piston head, + Mixer with a capacity of 35T / h, mixer RTM 1500 and autorotocontrol RTC106PB, – The site allows the use of a sand of contact and a sand of filling;
– the number of molding boxes : 156 pairs ( 156 molding boxes 1400*900*300 mm and 156 molding boxes 1400*900*350 mm)
– the number of palet cars : 163
– vent hole piercing device : the piercing device allows to realize 2 pouring holes and 15 vent holes : Please find attached the drilling tools drawings.
– Pattern plate carrier : there are 4 pattern plate carriers.
– Control system : PLC SIEMENS MP377 touch screen 15” for the molding line and PLC SIEMENS S7 for the mixer
– Green sand plant : the mixer (SCOVAL RTM 1500) , the weigh hopper, the 2 conveyors that convey the sand to the molding machine, and the 2 hoppers (one for contact sand) above the molding machine (capacity 4 tons) were installed in 2010 with the molding line. There is no cooling system. The capacity of the main sand tank is cca 260 m3
– Shakeout Length : 5750 mm , Width : 1500 mm. Please find attached drawing
– Rotating drum :
– Power demand : 150 KW
– the number of molding boxes : 156 pairs ( 156 molding boxes 1400*900*300 mm and 156 molding boxes 1400*900*350 mm)
– the number of palet cars : 163
– vent hole piercing device : the piercing device allows to realize 2 pouring holes and 15 vent holes : Please find attached the drilling tools drawings.
– Pattern plate carrier : there are 4 pattern plate carriers.
– Control system : PLC SIEMENS MP377 touch screen 15” for the molding line and PLC SIEMENS S7 for the mixer
– Green sand plant : the mixer (SCOVAL RTM 1500) , the weigh hopper, the 2 conveyors that convey the sand to the molding machine, and the 2 hoppers (one for contact sand) above the molding machine (capacity 4 tons) were installed in 2010 with the molding line. There is no cooling system. The capacity of the main sand tank is cca 260 m3
– Shakeout Length : 5750 mm , Width : 1500 mm. Please find attached drawing
– Rotating drum :
– Power demand : 150 KW
A) DISA 2032 1x DMM with Pattern changer 1x SSU with Sand hopper,
Complete PMC 18 m, PMC Drive, Hydraulic power pack,
PLC control unit S5
PMC covers and dust captures
1x SBC 16 m 1x Shakeout 1x vibratory conveyor 1x casting conveyor pattern holders 1x Cyclone Sound protect cabine B) Prespour furnace ASEA Pouring machine body 1x Power panel and hydraulic packs 1x Control and operating panels 1x Transformer 1x Cooling system 1x Set of spare formers 1x stopper system unit Set of rails
C) Sand Plant 10x sylo/bunker 10x sylo discharge belt conveyors
1x collecting belt conveyour
1x dosing belt to mixer
1x Feeder hopper of mixer
1x Sand Mixer (L 450 x W 310 x H 250 cm)
1x Moister control system
1x prepared sand belt
1x second transverse belt to SSU
1x return sand belt to cooler
1x Sand cooler, cyclone, blower, water dossing system, stack 1x additive dosage 1x Polygonal screen
